To Next Page

To Previous Page

Command Manual – IPv6 Routing

H3C S7500E Series Ethernet Switches Chapter 3 IPv6 OSPFv3 Configuration Commands

3-19

Field Description

SeqNum LSA sequence Number

Age Age of LSA

CkSum Checksum

# Display the statistics of OSPFv3 link state retransmission list.

<Sysname> display ospfv3 retrans-list statistics

OSPFv3 Router with ID (3.3.3.3) (Process 1)

Interface Neighbor LSA-Count

Vlan100 1.1.1.1 0

Table 3-13 Description on the fields of the display ospfv3 retrans-list statistics

command

Field Description

Interface Interface name

Neighbor Neighbor ID

LSA-Count Number of LSAs in the retransmission request list

3.1.14 display ospfv3 routing

Syntax

display ospfv3 [ process-id ] routing [ ipv6-address prefix-length |

ipv6-address/prefix-length | abr-routes | asbr-routes | all | statistics ]

View

Any view

Parameters

process-id: Specifies the ID of an OSPFv3 process, ranging from 1 to 65535.

ipv6-address: IPv6 address prefix.

prefix-length: Prefix length, in the range 0 to 128.

abr-routes: Displays routes to ABR.

asbr-routes: Displays routes to ASBR.

all: Displays all routes.

statistics: Displays the OSPFv3 routing table statistics .

H3C S7500E Series Command Manual

Other manuals for H3C S7500E Series