H3C S7500E Series

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 6 Routing Policy Configuration Commands
6-11
Examples
# Display the information of BGP AS path list 1.
<Sysname> display ip as-path 1
ListID Mode Expression
1 permit 2
Table 6-1 Description on the fields of the display ip as-path command
Field Description
ListID AS path ACL ID
Mode Matching mode: permit, deny
Expression Regular expression for matching
6.1.14 display ip community-list
Syntax
display ip community-list [ basic-community-list-number |
adv-community-list-number ]
View
Any view
Parameters
basic-community-list-number: Basic community list number, in the range of 1 to 99.
adv-community-list-number: Advanced community list number, in the range of 100 to
199.
Description
Use the display ip community-list command to display BGP community list
information.
All BGP community list information will be displayed if no basic-community-list-number
or adv-community-list-number is specified.
Related commands: ip community-list, if-match community, apply community.
Examples
# Display the information of the BGP community list 1.
<Sysname> display ip community-list 1
Community List Number 1
permit 1:1 1:2 2:2