H3C S7500E Series

Command Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches Chapter 1 Basic Configuration Commands
1-11
Parameters
None
Description
Use the display history-command command to display commands saved in the
history buffer.
The system will save validated history commands performed last in current user view to
the history buffer, which can save up to ten commands by default. You can use the
history-command max-size command to set the size of the history buffer. Refer to the
history-command max-size command in Login Commands for related configuration.
Examples
# Display validated history commands in current user view (the display information
varies with configuration).
<Sysname> display history-command
display history-command
system-view
vlan 2
quit
1.1.11 display hotkey
Syntax
display hotkey
View
Any view
Parameters
None
Description
Use the display hotkey command to display hotkey information.
Examples
# Display hotkey information.
<Sysname> display hotkey
----------------- HOTKEY -----------------
=Defined hotkeys=
Hotkeys Command