H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 3 OSPF Configuration Commands
3-56
3.1.54 reset ospf redistribution
Syntax
reset ospf [ process-id ] redistribution
View
User view
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
Description
Use the reset ospf redistribution command to restart route redistribution. If no
process ID is specified, using the command restarts route redistribution for all OSPF
processes.
Examples
# Restart route redistribution.
<Sysname> reset ospf redistribution
3.1.55 rfc1583 compatible
Syntax
rfc1583 compatible
undo rfc1583 compatible
View
OSPF view
Parameters
None
Description
Use the rfc1583 compatible command to make routing rules defined in RFC1583
compatible.
Use the undo rfc1583 compatible command to disable the function.
By default, RFC1583 routing rules are compatible.
RFC1583 and RFC2328 have different routing rules on selecting the best route when
multiple AS external LSAs describe routes to the same destination. Using this
command can make them compatible.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English