H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches Chapter 4 PIM Configuration Commands
4-39
[Sysname-Vlan-interface100] pim hello-option override-interval 2000
4.1.41 pim holdtime assert
Syntax
pim holdtime assert interval
undo pim holdtime assert
View
Interface view
Parameters
interval: Assert timeout time in seconds, with an effective range of 7 to 2,147,483,647.
Description
Use the pim holdtime assert command to configure the assert timeout time on the
current interface.
Use the undo pim holdtime assert command to restore the system default.
By default, the assert timeout time is 180 seconds.
Related commands: holdtime join-prune, pim holdtime join-prune, holdtime
assert.
Examples
# Set the assert timeout time to 100 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim holdtime assert 100
4.1.42 pim holdtime join-prune
Syntax
pim holdtime join-prune interval
undo pim holdtime join-prune
View
Interface view
Parameters
interval: Join/prune timeout time in seconds, with an effective range of 1 to 65,535.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English