H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 3 IPv6 OSPFv3 Configuration Commands
3-16
intra-prefix: Displays the Intra-area-prefix LSA information of the OSPFv3 link state
request list.
link: Displays the Link LSA information of the OSPFv3 link state request list.
network: Displays the Network-LSA information of the OSPFv3 link state request list.
router: Displays the Router-LSA information of the OSPFv3 link state request list.
link-state-id: Link state ID, in the format of an IPv4 address.
originate-router ip-address: Specifies the router ID of an advertising router.
statistics: Displays the LSA statistics of the OSPFv3 link state request list.
Description
Use the display ospfv3 request-list command to display OSPFv3 link state request
list information.
If no process is specified, link state request list information of all OSPFv3 processes is
displayed.
Examples
# Display the information of OSPFv3 link state request list.
<Sysname> display ospfv3 request-list
OSPFv3 Router with ID (11.1.1.1) (Process 1)
Interface Vlan100 Area-ID 0.0.0.0
--------------------------------------------------------------------------
Nbr-ID 12.1.1.1
LS-Type LS-ID AdvRouter SeqNum Age CkSum
Router-LSA 0.0.0.0 12.1.1.1 0x80000014 774 0xe5b0
Table 3-10 Description on the fields of the display ospfv3 request-list command
Field Description
Interface Interface name
Area-ID Area ID
Nbr-ID Neighbor router ID
LS-Type Type of LSA
LS-ID Link state ID
AdvRouter Advertising router
SeqNum LSA sequence number

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English