H3C S7500E Series Command Manual

Command Manual – ARP
H3C S7500E Series Ethernet Switches Chapter 1 ARP Configuration Commands
1-11
Parameters
None
Description
Use the arp resolving-route enable command to enable ARP defense against IP
packet attacks.
Use the undo arp resolving-route enable command to disable the function.
By default, the support for ARP defense against IP packet attacks is enabled.
Examples
# Enable ARP defense against IP packet attacks.
<Sysname> system-view
[Sysname] arp resolving-route enable

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English