EasyManuals Logo

H3C S7500E Series Command Manual

H3C S7500E Series
1565 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #443 background imageLoading...
Page #443 background image
Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 5 BGP Configuration Commands
5-14
Maximum allowed prefix number: 4294967295
Threshold: 75%
Configured hold timer value: 180
Keepalive timer value: 60
Minimum time between advertisement runs is 30 seconds
Peer Preferred Value: 0
No routing policy is configured
Members:
Peer V AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
2.2.2.1 4 200 0 0 0 0 00:00:35 Active
Table 5-2 Description on the fields of the display bgp group command
Field Description
BGP peer-group Name of the BGP peer group
remote AS AS number of peer group
type Type of the BGP peer group: IBGP or EBGP
Maximum allowed prefix
number
Maximum allowed prefix number
Threshold Threshold value
Configured hold timer value Holdtime interval
Keepalive timer value Keepalive interval
Minimum time between
advertisement runs
Minimum time between advertisement runs
Peer Preferred Value Preferred value of the routes from the peer
No routing policy is configured No routing policy is configured for the peer
Members
Detailed information of the members in the peer
group
Peer IPv4 address of the peer
V BGP version running on peers
AS AS number of the peers
MsgRcvd Number of messages received
MsgSent Number of messages sent
OutQ Number of messages to be sent
PrefRcv Number of prefixes received

Table of Contents

Other manuals for H3C S7500E Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S7500E Series and is the answer not in the manual?

H3C S7500E Series Specifications

General IconGeneral
BrandH3C
ModelS7500E Series
CategorySwitch
LanguageEnglish

Related product manuals