Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 3 IPv6 OSPFv3 Configuration Commands
3-8
Parameters
process-id: Specifies ID of an OSPFv3 process, ranging from 1 to 65535.
external: Specifies to display information about AS-external LSAs.
inter-prefix: Specifies to display information about Inter-area-prefix LSAs.
inter-router: Specifies to display information about Inter-area-router LSAs.
intra-prefix: Specifies to display information about Intra-area-prefix LSAs.
link: Specifies to display information about Link-LSAs.
network: Specifies to display information about Network-LSAs.
router: Specifies to display information about Router-LSAs.
link-state-id: Link state ID, an IPv4 address.
originate-router router-id: The ID of the advertising router .
total: Displays the LSA statistics information in the LSDB.
Description
Use the display ospfv3 lsdb command to display OSPFv3 LSDB information.
Examples
# Display OSPFv3 LSDB information.
<Sysname> display ospfv3 lsdb
OSPFv3 Router with ID (5.5.5.5) (Process 1)
Link-LSA (Interface Vlan-interface100)
----------------------------------------------------------------
Link State ID Origin Router Age Seq# CkSum Prefix
0.15.0.9 5.5.5.5 0304 0x80000001 0x5b6a 1
0.15.0.9 6.6.6.6 0311 0x80000001 0x6956 1
Router-LSA (Area 0.0.0.0)
----------------------------------------------------------------
Link State ID Origin Router Age Seq# CkSum Link
0.0.0.0 5.5.5.5 0263 0x80000002 0x823f 1
0.0.0.0 6.6.6.6 0264 0x80000003 0x625a 1
Network-LSA (Area 0.0.0.0)
----------------------------------------------------------------
Link State ID Origin Router Age Seq# CkSum
0.15.0.9 6.6.6.6 0264 0x80000001 0x3498
Intra-Area-Prefix-LSA (Area 0.0.0.0)
----------------------------------------------------------------
Link State ID Origin Router Age Seq# CkSum Prefix Reference
0.0.0.2 6.6.6.6 0263 0x80000001 0x95c4 1 Network-LSA
To Next Page
Loading...
Need help?
General
