H3C S7500E Series Command Manual

Command Manual – Login
H3C S7500E Series Ethernet Switches
Chapter 1 Commands for Logging into an
Ethernet Switch
1-8
Examples
# Display the information about the current user interface.
<Sysname> display users
The user application information of the user interface(s):
Idx UI Delay Type Userlevel
1 VTY 0 00:11:45 TEL 3
2 VTY 1 00:16:35 TEL 3
3 VTY 2 00:16:54 TEL 3
+ 4 VTY 3 00:00:00 TEL 3
Following are more details.
VTY 0 :
Location: 192.168.0.123
VTY 1 :
Location: 192.168.0.43
VTY 2 :
Location: 192.168.0.2
VTY 3 :
User name: user
Location: 192.168.0.33
+ : Current operation user.
F : Current operation user work in async mode.
Table 1-2 Descriptions on the fields of the display users command
Field Description
+ The information displayed is about the current user interface.
F
The information is about the current user interface, and the current
user interface operates in asynchronous mode.
UI
The numbers in the left sub-column are the absolute user interface
indexes, and those in the right sub-column are the relative user
interface indexes.
Delay The period in seconds the user interface idles for.
Type User type
Userlevel
The level of the commands available to the users logging into the
user interface
Location The IP address form which the user logs in.
User name The login name of the user that logs into the user interface.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English