To Next Page

To Previous Page

Command Manual – QoS

H3C S7500E Series Ethernet Switches

Chapter 3 Congestion Management Configuration

Commands

3-2

Parameters

interface-type: Port type.

interface-number: Port number.

Description

Use the display qos wrr interface command to display the configuration of weighted

round robin (WRR) queues of a port.

If no port number is specified, the command displays the configurations of WRR

queues of all ports.

Related commands: qos wrr.

Examples

# Display the configuration of WRR queues of Ethernet 2/0/1.

<Sysname> display qos wrr interface Ethernet 2/0/1

Interface: Ethernet2/0/1

Output queue: Weighted round robin queue

Queue ID Group Weight

-------------------------------------

0 sp N/A

1 sp N/A

2 1 3

3 1 4

4 1 5

5 1 6

6 1 7

7 1 8

Table 3-1 Description on the fields of the display qos wrr interface command

Field Description

Interface Port name, composed of port type and port number

Output queue The type of the current output queue

Queue ID ID of the queue

Group Group ID, indicating which group a queue belongs to.

Weight

The weight of each queue during scheduling. N/A

indicates that SP queue scheduling algorithm is adopted.

H3C S7500E Series Command Manual

Other manuals for H3C S7500E Series