H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches Chapter 4 PIM Configuration Commands
4-16
join-prune: Displays the number of Join/prune messages.
state-refresh: Displays the number of state refresh messages.
Description
Use the display pim control-message counters command to view the statistics
information of PIM control messages.
Examples
# View the statistics information of all types of PIM control messages on all interfaces.
<Sysname> display pim control-message counters
PIM global control-message counters:
Received Sent Invalid
Register 20 37 2
Register-Stop 25 20 1
Probe 10 5 0
PIM control-message counters for interface: Vlan-interface1
Received Sent Invalid
Assert 10 5 0
Graft 20 37 2
Graft-Ack 25 20 1
Hello 1232 453 0
Join/Prune 15 30 21
State-Refresh 8 7 1
BSR 3243 589 1
C-RP 53 32 0
Table 4-3 Description on the fields of display pim control-message counters
Field Description
Received Number of messages received
Sent Number of messages sent
Invalid Number of invalid messages
Register Register messages
Register-Stop Register-stop messages
Probe Null register messages
Assert Assert messages
Graft Graft messages
Graft-Ack Graft-ack messages
Hello Hello messages

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English