H3C S7500E Series Command Manual

Command Manual – ACL
H3C S7500E Series Ethernet Switches Chapter 1 ACL Configuration Commands
1-32
Table 1-11 ICMPv6-specific match criteria for advanced IPv6 ACL rules
Parameters Function Description
icmpv6-type
{ icmpv6-type
icmpv6-code |
icmpv6-message }
Specifies the
ICMPv6
message type
and code
The icmpv6-type argument ranges from 0
to 255.
The icmpv6-code argument ranges from 0
to 255.
The icmpv6-message argument specifies a
message name. For available ICMPv6
messages, see
Table 1-12
The following table provides the ICMPv6 messages that you can specify in advanced
IPv6 ACL rules.
Table 1-12 Available ICMPv6 messages
ICMPv6 message Type Code
redirect 137 0
echo-request 128 0
echo-reply 129 0
err-Header-field 4 0
frag-time-exceeded 3 1
hop-limit-exceeded 3 0
host-admin-prohib 1 1
host-unreachable 1 3
neighbor-advertisement 136 0
neighbor-solicitation 135 0
network-unreachable 1 0
packet-too-big 2 0
port-unreachable 1 4
router-advertisement 134 0
router-solicitation 133 0
unknown-ipv6-opt 4 2
unknown-next-hdr 4 1
Description
Use the rule command to create an IPv6 ACL rule or modify the rule if it has existed.
Use the undo rule command to remove an IPv6 ACL rule or parameters from the rule.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English