H3C S7500E Series

Command Manual – File System Management
H3C S7500E Series Ethernet Switches Chapter 2 FTP Configuration Commands
2-7
Parameters
pathname: Path name.
Description
Use the cd command to change the current working directory on the remote FTP
server.
You can use this command to access another authorized directory on the FTP server.
Examples
# Change the current working directory to flash:/logfile.
[ftp]cd flash:/logfile
250 CWD command successful.
2.2.5 cdup
Syntax
cdup
View
FTP client view
Parameters
None
Description
Use the cdup command to exit the current directory and enter the upper directory of the
FTP server.
Examples
# Change the current working directory path to the upper directory.
[ftp]cdup
200 CDUP command successful.
2.2.6 close
Syntax
close
View
FTP client view