H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches Chapter 3 IGMP Configuration Commands
3-5
Examples
# View the IGMP configuration and running status on VLAN-interface 1.
<Sysname> display igmp interface Vlan-interface 1 verbose
Vlan-interface1 (10.10.1.20):
IGMP is enabled
Current IGMP version is 2
Value of query interval for IGMP(in seconds): 60
Value of other querier present interval for IGMP(in seconds): 125
Value of maximum query response time for IGMP(in seconds): 10
Value of last member query interval(in seconds): 1
Value of startup query interval(in seconds): 15
Value of startup query count: 2
General query timer expiry (hours:minutes:seconds): 00:00:54
Querier for IGMP: 10.10.1.10
IGMP activity: 0 joins, 0 leaves
Multicast routing on this interface: enabled
Robustness: 2
Require-router-alert: disabled
Fast-leave: disabled
Startup-query-timer-expiry: off
Other-querier-present-timer-expiry: off
Table 3-3 Description on the fields of the display igmp interface command
Field Description
Vlan-interface1 (10.10.1.20) Interface name (IP address)
Current IGMP version
Version of IGMP currently running on the
interface
Value of query interval for IGMP(in
seconds)
IGMP query interval, in seconds
Value of other querier present interval
for IGMP(in seconds)
Other querier present interval, in
seconds
Value of maximum query response time
for IGMP(in seconds)
Maximum response time for IGMP
general queries, in seconds
Value of last member query interval(in
seconds)
IGMP last member query interval, in
seconds
Value of startup query interval(in
seconds)
IGMP startup query interval, in seconds
Value of startup query count
Number of IGMP general queries the
device sends on startup
General query timer expiry
Remaining time of the IGMP general
query timer

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English