H3C S7500E Series

Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration Commands
1-65
1.3.6 key
Syntax
key { accounting | authentication | authorization } string
undo key { accounting | authentication | authorization } string
View
HWTACACS scheme view
Parameters
accounting: Sets the shared key for HWTACACS accounting packets.
authentication: Sets the shared key for HWTACACS authentication packets.
authorization: Sets the shared key for HWTACACS authorization packets.
string: Shared key, a string of 1 to 16 characters.
Description
Use the key command to set the shared key for HWTACACS authentication,
authorization, or accounting packets.
Use the undo key command to remove the configuration.
By default, no shared key is configured.
Related commands: display hwtacacs.
Examples
# Set the shared key for HWTACACS accounting packets to hello for HWTACACS
scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] key accounting hello
1.3.7 nas-ip
Syntax
nas-ip ip-address
undo nas-ip
View
HWTACACS scheme view