H3C S7500E Series Command Manual

Command Manual – DHCP
H3C S7500E Series Ethernet Switches Chapter 1 DHCP Server Configuration Commands
1-15
Field Description
static-bind ip-address 10.10.1.2
mask 255.0.0.0
static-bind mac-address
00e0-00fc-0001
The IP address and MAC address of the static
binding
Sibling node
The sibling node of the current node, nodes of
this kind in the output are:
z Child node: The child node (subnet segment)
address pool of the current node
z Parent node: The parent node (nature
network segment) address pool of the current
node
z Sibling node: The latter sibling node of the
current node (another subnet of the same
nature network). The earlier the sibling node
is configured, the higher selection priority the
sibling node has.
z PrevSibling node: The previous sibling node
of the current node
option Self-defined DHCP options
expired
The lease duration, in the format of day, hour,
and minute
1.1.18 dns-list
Syntax
dns-list ip-address&<1-8>
undo dns-list { ip-address | all }
View
DHCP address pool view
Parameters
ip-address&<1-8>: DNS server IP address. &<1-8> means you can specify up to eight
DNS server addresses separated by spaces.
all: Specifies all DNS server addresses to remove.
Description
Use the dns-list command to specify DNS server addresses in a DHCP address pool.
Use the undo dns-list command to remove DNS server addresses from a DHCP
address pool.
By default, no DNS server address is specified.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English