H3C S7500E Series Command Manual

Command Manual – Port Mirroring
H3C S7500E Series Ethernet Switches Chapter 1 Port Mirroring Configuration Commands
1-1
Chapter 1 Port Mirroring Configuration
Commands
1.1 Port Mirroring Configuration Commands
1.1.1 display mirroring-group
Syntax
display mirroring-group { group-id | all | local | remote-destination |
remote-source }
View
Any view
Parameters
group-id: Port mirroring group number, in the range of 1 to 4.
all: Specifies all the port mirroring groups.
local: Specifies local port mirroring groups.
remote-destination: Specifies remote destination port mirroring groups.
remote-source: Specifies remote source port mirroring groups.
Description
Use the display mirroring-group command to display the information about a port
mirroring group or multiple port mirroring groups.
The output information varies with port mirroring group type and is organized by
mirroring group numbers.
Examples
# Display the information about all the port mirroring groups.
<Sysname> display mirroring-group all
mirroring-group 1:
type: local
status: active
mirroring port:
Ethernet2/0/1 both
monitor port: Ethernet2/0/10
mirroring-group 2:

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English