Command Manual – File System Management
H3C S7500E Series Ethernet Switches Chapter 1 File System Management Commands
1-3
The dir /all command displays the files removed to the recycle bin. These files are
enclosed in pairs of brackets.
This command supports the wildcard *.
Caution:
If you delete two files in different directories but with the same filename, only the last
one is retained in the recycle bin.
Examples
# Remove the file tt.cfg from the root directory.
<Sysname> delete tt.cfg
.
Delete flash:/ tt.cfg?[Y/N]:y
.
%Delete file flash:/ tt.cfg...Done.
1.1.4 dir
Syntax
dir [ /all | file-url ]
View
User view
Parameters
/all: Displays all files (including those in the recycle bin).
file-url: Name of the file or directory to be displayed. Asterisks (*) are acceptable as
wildcards. For example, to display files with the .txt extension under the current
directory, you may use the dir *.txt command.
Description
Use the dir command to display information about all visible files and folders in the
current directory.
Use the dir /all command to display information about all files and folders on your
device, including hidden files, hidden subfiles and those in the recycle bin. The names
of these deleted files are enclosed in pairs of brackets ([ ]).
The dir file-url command displays information about a file or folder.
To Next Page
Loading...
Need help?
General
