H3C S7500E Series

Command Manual – File System Management
H3C S7500E Series Ethernet Switches Chapter 2 FTP Configuration Commands
2-16
2.2.15 get
Syntax
get remotefile [ localfile ]
View
FTP client view
Parameters
remotefile: File name on the remote FTP server.
localfile: Local file name.
Description
Use the get command to download a file from a remote FTP server and save it.
If no name is specified, the local file uses the name of the source file on the FTP server
by default.
Examples
# Download file testcfg.cfg and save it as aa.cfg.
[ftp]get testcfg.cfg aa.cfg
227 Entering Passive Mode (2,2,2,2,17,163).
125 ASCII mode data connection already open, transfer starting for testcfg.cfg.
.....226 Transfer complete.
FTP: 5190 byte(s) received in 7.754 second(s), 669.00 byte(s)/sec.
[ftp]
2.2.16 lcd
Syntax
lcd
View
FTP client view
Parameters
None
Description
Use the lcd command to display the local directory of the FTP client.