H3C S7500E Series

Command Manual – File System Management
H3C S7500E Series Ethernet Switches Chapter 2 FTP Configuration Commands
2-23
View
FTP client view
Parameters
protocol-command: FTP command.
Description
Use the remotehelp command to display the help information of FTP-related
commands supported by the remote FTP server.
If no parameter is specified, FTP-related commands supported by the remote FTP
server are displayed.
Examples
# Display FTP commands supported by the remote FTP server.
[ftp] remotehelp
214-Here is a list of available ftp commands
Those with '*' are not yet implemented.
USER PASS ACCT* CWD CDUP SMNT* QUIT REIN*
PORT PASV TYPE STRU* MODE* RETR STOR STOU*
APPE* ALLO* REST* RNFR* RNTO* ABOR* DELE RMD
MKD PWD LIST NLST SITE* SYST STAT* HELP
NOOP* XCUP XCWD XMKD XPWD XRMD
214 Direct comments to H3C company.
# Display the help information for the user command.
[ftp] remotehelp user
214 Syntax: USER <sp> <username>.
[ftp]
Table 2-3 Description on the fields of the remotehelp command
Field Description
214-Here is a list of available ftp
commands
The following is an available FTP command list.
Those with '*' are not yet
implemented.
Those commands with “*” are not yet
implemented.
USER Username
PASS Password
CWD Change the current working directory
CDUP Change to parent directory