To Next Page

To Previous Page

Command Manual – System Maintaining and Debugging

H3C S7500E Series Ethernet Switches Chapter 1 Basic Configuration Commands

1-15

undo header { incoming | legal | login | motd | shell }

View

System view

Parameters

incoming: Sets the banner displayed when a Modem login user enters user view. If

authentication is needed, the incoming banner is displayed after the authentication is

passed.

legal: Sets the authorization banner before a user logs onto the terminal interface. The

legal banner is displayed before the user inputs the username and password.

motd: Banner displayed before login. If authentication is required, the banner is

displayed before authentication.

shell: Sets the banner displayed when a non Modem login user enters user view.

text: Banner message, which can be input in two formats. Refer to the Basic System

Configuration part in the operation manual for the detailed information.

Description

Use the header command to create a banner.

Use the undo header command to clear a banner.

Examples

# Configure banners.

<Sysname> system-view

[Sysname] header incoming %