Command Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches Chapter 1 Basic Configuration Commands
1-18
CTRL_K Kill outgoing connection.
CTRL_N Display the next command from the history buffer.
CTRL_P Display the previous command from the history buffer.
CTRL_R Redisplay the current line.
CTRL_V Paste text from the clipboard.
CTRL_W Delete the word left of the cursor.
CTRL_X Delete all characters up to the cursor.
CTRL_Y Delete all characters after the cursor.
CTRL_Z Return to the user view.
CTRL_] Kill incoming connection or redirect connection.
ESC_B Move the cursor one word back.
ESC_D Delete remainder of word.
ESC_F Move the cursor forward one word.
ESC_N Move the cursor down a line.
ESC_P Move the cursor up a line.
ESC_< Specify the beginning of clipboard.
ESC_> Specify the end of clipboard.
1.1.16 quit
Syntax
quit
View
Any view
Parameters
None
Description
Use the quit command to exit to a lower-level view. If the current view is user view, the
quit command terminates the current connection and reconnects to the device.
Examples
# Switch from Ethernet 2/0/1 port view to system view, and then to user view.
[Sysname-Ethernet2/0/1] quit
[Sysname] quit
<Sysname>
To Next Page
Loading...
Need help?
General
