Command Manual – System Maintaining and Debugging
H3C S7500E Series Ethernet Switches Chapter 1 Basic Configuration Commands
1-19
1.1.17 return
Syntax
return
View
Any view except user view
Parameters
None
Description
Use the return command to return to user view from current view, as you do with the
hot key <Ctrl+Z>.
Related commands: quit.
Examples
# Return to user view from Ethernet port view.
[Sysname] interface Ethernet 2/0/1
[Sysname-Ethernet 2/0/1] return
<Sysname>
1.1.18 super
Syntax
super [ level ]
View
User view
Parameters
level: User level, in the range 0 to 3.
Description
Use the super command to switch from the current user level to a specified user level.
There are four levels of commands:
z Visit: involves commands for network diagnosis (such as ping and tracert),
commands for accessing an external device (such as Telnet client, SSH client,
RLOGIN). Saving the configuration file is not allowed at this level.
z Monitor: includes the display and debugging commands for system maintenance,
and service fault diagnosis. Saving the configuration file is not allowed at this level.
To Next Page
Loading...
Need help?
General
