H3C S7500E Series Command Manual

Command Manual – HA
H3C S7500E Series Ethernet Switches Chapter 1 VRRP Configuration Commands
1-4
Examples
# Display the statistics about all standby groups.
<Sysname> display vrrp statistics
Interface : Vlan-interface100
VRID : 1
CheckSum Errors : 16 Version Errors : 0
Invalid Type Pkts Rcvd : 0 Advertisement Interval Errors : 0
IP TTL Errors : 0 Auth Failures : 0
Invalid Auth Type : 0 Auth Type Mismatch : 0
Packet Length Errors : 0 Address List Errors : 0
Become Master : 1 Priority Zero Pkts Rcvd : 0
Advertise Rcvd : 16 Priority Zero Pkts Sent : 0
Advertise Sent : 40
Interface : Vlan-interface200
VRID : 105
CheckSum Errors : 0 Version Errors : 0
Invalid Type Pkts Rcvd : 0 Advertisement Interval Errors : 0
IP TTL Errors : 0 Auth Failures : 0
Invalid Auth Type : 0 Auth Type Mismatch : 0
Packet Length Errors : 0 Address List Errors : 0
Become Master : 0 Priority Zero Pkts Rcvd : 0
Advertise Rcvd : 0 Priority Zero Pkts Sent : 0
Advertise Sent : 30
Global statistics
CheckSum Errors : 16
Version Errors : 0
VRID Errors : 20
Table 1-2 Description on the fields of the display vrrp statistics command
Field Description
Interface Interface to which the standby group belongs
VRID Number of the standby group
CheckSum Errors Number of packets with checksum errors
Version Errors Number of packets with version errors
Invalid Type Pkts Rcvd Number of packets with incorrect packet type
Advertisement Interval Errors
Number of packets with advertisement interval
errors
IP TTL Errors Number of packets with TTL errors

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English