H3C S7500E Series Command Manual

Command Manual – HA
H3C S7500E Series Ethernet Switches Chapter 1 VRRP Configuration Commands
1-17
Invalid Type Pkts Rcvd : 0 Advertisement Interval Errors : 0
Hop Limit Errors : 0 Auth Failures : 0
Invalid Auth Type : 0 Auth Type Mismatch : 0
Packet Length Errors : 0 Address List Errors : 0
Become Master : 1 Priority Zero Pkts Rcvd : 0
Advertise Rcvd : 0 Priority Zero Pkts Sent : 0
Advertise Sent : 30
Global statistics
CheckSum Errors : 0
Version Errors : 0
VRID Errors : 1439
Table 1-4 Description on the fields of the display vrrp ipv6 statistics command
Field Description
Interface Interface to which the standby group belongs
VRID Number of the standby group
CheckSum Errors Number of packets with checksum errors
Version Errors Number of packets with version errors
Invalid Type Pkts Rcvd Number of packets with incorrect packet type
Advertisement Interval Errors
Number of packets with advertisement interval
errors
Hop Limit Errors Number of packets with hop limit errors
Auth Failures Number of packets with authentication failures
Invalid Auth Type
Number of packets with authentication failures due
to invalid authentication types
Auth Type Mismatch
Number of packets with authentication failures due
to mismatching authentication types
Packet Length Errors Number of packets with VRRP packet length errors
Address List Errors
Number of packets with virtual IPv6 address list
errors
Become Master
Number of times that the switch worked as the
master
Priority Zero Pkts Rcvd
Number of received advertisements with the
priority of 0
Advertise Rcvd Number of received advertisements
Advertise Sent Number of advertisements sent
Global statistics Statistics about all standby groups
CheckSum Errors Total number of packets with checksum errors

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English