H3C S7500E Series

Command Manual – Appendix
H3C S7500E Series Ethernet Switches Appendix A Command Index
A-3
auto cost enable IPv4 Routing Commands 4-2
auto-execute command Login Commands 1-3
auto-rp enable Multicast Commands 4-1
B
backup startup-configuration File System Management Commands 1-13
balance IPv4 Routing Commands 5-3
balance IPv6 Routing Commands 5-1
bandwidth-reference IPv4 Routing Commands 3-5
bandwidth-reference IPv4 Routing Commands 4-3
bestroute as-path-neglect IPv4 Routing Commands 5-3
bestroute as-path-neglect IPv6 Routing Commands 5-2
bestroute compare-med IPv4 Routing Commands 5-4
bestroute compare-med IPv6 Routing Commands 5-2
bestroute med-confederation IPv4 Routing Commands 5-5
bestroute med-confederation IPv6 Routing Commands 5-3
bgp IPv4 Routing Commands 5-5
bims-server DHCP Commands 1-1
binary File System Management Commands 2-5
bootfile-name DHCP Commands 1-2
boot-loader
System Maintaining and Debugging
Commands
3-1
bootrom
System Maintaining and Debugging
Commands
3-2
bpdu-tunnel dot1q enable QinQ-BPDU Tunneling Commands 2-2
bpdu-tunnel dot1q stp QinQ-BPDU Tunneling Commands 2-1
bpdu-tunnel tunnel-dmac QinQ-BPDU Tunneling Commands 2-3
broadcast-suppression
Port Correlation Configuration
Commands
1-1
bsr-policy Multicast Commands 4-2
bye File System Management Commands 2-6
bye SSH Commands 1-29
C
cache-sa-enable Multicast Commands 5-1