H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 3 OSPF Configuration Commands
3-13
Table 3-3 Description on the fields of the display ospf brief command
Field Description
RouterID Router ID
Border Router ABR, ASBR or NSSA ABR
Route Tag The tag of redistributed routes
Multi-VPN-Instance is not
enabled
The OSPF process does not support
multi-VPN-instance.
Applications Supported Applications supported
SPF-schedule-interval Interval for SPF calculations
LSA generation interval LSA generation interval
LSA arrival interval Minimum LSA repeat arrival interval
Default ASE Parameter Default ASE Parameters: metric, tag, route type.
Route Preference Internal route priority
ASE Route Preference External route priority
SPF Computation count SPF computation count of the OSPF process
RFC1583 Compatible
Compatible with routing rules defined in
RFC1583
Graceful restart interval GR restart interval
Area Count Area number of the current process
Nssa Area Count NSSA area number of the current process
ExChange/Loading Neighbors Neighbors in ExChange/Loading state
Area Area ID in the IP address format
Authtype
Authentication type of the area:
Non-authentication, simple authentication, or
MD5 authentication
Area flag The type of the area
SPF scheduled Count SPF calculation count in the OSPF area
Interface IP address of the interface
Cost Interface cost
State Interface state
Type Interface network type
MTU Interface MTU
Priority Router priority
Designated Router The Designated Router
Backup Designated Router The Backup Designated Router

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English