H3C S7500E Series

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 4 IS-IS Configuration Commands
4-21
RIPng: 0 OSPFv3: 0
Lsp information:
LSP Source ID: No. of used LSPs
0000.0000.0002 001
Table 4-10 Description on the fields of the display isis statistics command
Field Description
Statistics information for
ISIS(processid)
Statistics for the ISIS process
Level-1 Statistics Level-1 Statistics
Level-2 Statistics Level-2 Statistics
Learnt routes information
Number of learnt IPv4 routes
Number of learnt IPv6 routes
IPv4 Imported
Routes
Redistributed IPv4 routes
z Static
z Direct
z ISIS
z BGP
z RIP
z OSPF
Imported routes
information
IPv6 Imported
Routes
Redistributed IPv6 routes
z Static
z Direct
z ISISv6
z BGP4+
z RIPng
z OSPFv3
Lsp information
LSP information
z LSP Source ID: ID of the source system
z No. of used LSPs: number of used LSPs
4.1.17 domain-authentication-mode
Syntax
domain-authentication-mode { simple | md5 } password [ ip | osi ]
undo domain-authentication-mode
View
IS-IS view