H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 5 BGP Configuration Commands
5-20
BGP Local router ID is 10.10.10.1
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Network NextHop MED LocPrf PrefVal Path/Ogn
*> 40.40.40.0/24 20.20.20.1 0 200 300i
Table 5-6 Description on the fields of the display bgp routing command
Field Description
Total Number
of Routes
Total Number of Routes
BGP Local
router ID
BGP Local router ID
Status codes
Status codes:
* – valid
> – best
d – damped
h – history
i – internal (IGP)
s – summary suppressed (suppressed)
S – Stale
Origin
i – IGP (originated in the AS)
e – EGP (learned through EGP)
? – incomplete (learned by other means)
Network Destination network address
Next Hop Next hop IP address
MED MULTI_EXIT_DISC attribute
LocPrf Local preference value
PrefVal Preferred value of the route
Path
AS_PATH attribute, recording the ASs the packet has passed to
avoid routing loops
PrefVal Preferred value

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English