H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 3 IPv6 OSPFv3 Configuration Commands
3-2
Examples
# Summarize networks 2000:1:1:1::/64 and 2000:1:1:2::/64 in Area 1 with
2000:1:1::/48.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] area 1
[Sysname-ospfv3-1-area-0.0.0.1] abr-summary 2000:1:1:: 48
3.1.2 area
Syntax
area area-id
View
OSPFv3 view
Parameters
area-id: ID of an area, a decimal integer (in the range of 0 to 4294967295 and changed
to IPv4 address format by the system) or an IPv4 address.
Description
Use the area command to enter OSPFv3 area view.
 Note:
The undo form of the command is not available. An area is removed automatically if
there is no configuration and no interface is up in the area.
Examples
# Enter OSPFv3 Area 0 view.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] area 0
[Sysname-ospfv3-1-area-0.0.0.0]
3.1.3 default cost
Syntax
default cost value

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English