H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 3 IPv6 OSPFv3 Configuration Commands
3-5
Number of LSA originated 0
Number of LSA received 0
Number of areas in this router is 2
Area BACKBONE(0)
Number of interfaces in this area is 1
SPF algorithm executed 1 times
Number of LSA 0. These LSAs' checksum Sum 0x0000
Number of Unknown LSA 0
Area 0.0.0.1
Number of interfaces in this area is 0
SPF algorithm executed 1 times
Number of LSA 0. These LSAs' checksum Sum 0x0000
Number of Unknown LSA 0
Routing Process "OSPFv3 (3)" with ID 0.0.0.0
SPF schedule delay 2 secs, Hold time between SPFs 2 secs
Minimum LSA interval 5 secs, Minimum LSA arrival 1 secs
Number of external LSA 0. These external LSAs' checksum Sum 0x0000
Number of AS-Scoped Unknown LSA 0
Number of LSA originated 0
Number of LSA received 0
Number of areas in this router is 0
Table 3-1 Description on the fields of the display ospfv3 command
Field Description
Routing Process "OSPFv3 (1)" with ID
0.0.0.0
OSPFv3 process is 1, and router ID is
0.0.0.0.
SPF schedule delay Delay interval of SPF calculation
Hold time between SPFs Hold time between SPF calculations
Minimum LSA interval Minimum interval for generating LSAs
Minimum LSA arrival Minimum LSA repeat arrival interval
Number of external LSA Number of ASE LSAs
These external LSAs’ checksum Sum Sum of all the ASE LSAs’ checksum
Number of AS-Scoped Unknown LSA
Number of LSAs with unknown flooding
scope
Number of LSA originated Number of LSAs originated
Number of LSA received Number of LSAs received
Number of areas in this router
Number of areas this router is attached
to
Area Area ID

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English