Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches Chapter 1 IPv6 Basics Configuration Commands
1-43
Description
Use the tcp ipv6 window command to set the size of the IPv6 TCP sending/receiving
buffer.
Use the undo tcp ipv6 window command to restore the default.
By default, the size of the IPv6 TCP sending/receiving buffer is 8 KB.
Examples
# Set the size of the IPv6 TCP sending/receiving buffer to 4 KB.
<Sysname> system-view
[Sysname] tcp ipv6 window 4
To Next Page
Loading...
