H3C S7500E Series

Command Manual – IPv6 Configuration
H3C S7500E Series Ethernet Switches Chapter 2 Dual Stack Configuration Commands
2-3
Examples
# Enable the interface VLAN-interface 100 to generate a link-local address
automatically.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 address auto link-local
2.1.4 ipv6 address eui-64
Syntax
ipv6 address ipv6-address/prefix-length eui-64
undo ipv6 address ipv6-address/prefix-length eui-64
View
Ethernet interface view
Parameters
ipv6-address/prefix-length: IPv6 address and prefix length. They together specify the
prefix length of an IPv6 address in the EUI-64 format. The prefix length of an EUI-64
address ranges from 1 to 64.
Description
Use the ipv6 address eui-64 command to configure a site-local address or global
unicast address in the EUI-64 format on an interface.
Use the undo ipv6 address eui-64 command to delete the site-local address or global
unicast address in the EUI-64 format on an interface.
By default, no site-local or global unicast address in the EUI-64 format is configured for
an interface.
Examples
# Configure the interface VLAN-interface 100 to generate an IPv6 address in the
EUI-64 format.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ipv6 address 2001::1/64 eui-64
2.1.5 ipv6 address link-local
Syntax
ipv6 address ipv6-address link-local