H3C S7500E Series Command Manual

Command Manual – VLAN
H3C S7500E Series Ethernet Switches Chapter 2 Isolate-User-VLAN Configuration Commands
2-2
VLAN ID: 3
VLAN Type: static
Isolate-user-VLAN type : secondary
Route Interface: configured
IP Address: 2.2.2.2
Subnet Mask: 255.255.255.0
Description: VLAN 0003
Broadcast MAX-ratio: 100%
Tagged Ports: none
Untagged Ports:
Ethernet2/0/2 Ethernet2/0/3
VLAN ID: 4
VLAN Type: static
Isolate-user-VLAN type : secondary
Route Interface: not configured
Description: VLAN 0004
Broadcast MAX-ratio: 100%
Tagged Ports: none
Untagged Ports:
Ethernet2/0/2 Ethernet2/0/4
Table 2-1 Description on the fields of the display isolate-user-vlan command
Field Description
Isolate-user-VLAN VLAN ID Isolate-user-VLAN ID
Secondary VLAN ID Secondary VLAN ID
VLAN ID VLAN ID
VLAN Type VLAN Type, either static or dynamic VLAN
Isolate-user-VLAN type
Current VLAN type, either Isolate-user-VLAN or
secondary VLAN
Route Interface Whether VLAN interface is configured or not
IP Address
IP address of VLAN interface. If VLAN interface is
not configured, this field will not be displayed.
Subnet Mask
Subnet Mask of the VLAN interface. If VLAN
interface is not configured, this field will not be
displayed.
Description VLAN description
Tagged Ports Indicating the ports that need to have VLAN tag
Untagged Ports Indicating the ports that need not to have VLAN tag

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English