H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches Chapter 3 IGMP Configuration Commands
3-26
3.1.28 version
Syntax
version version-number
undo version
View
IGMP view
Parameters
version-number: IGMP version, in the range of 1 to 3.
Description
Use the version command to configure the IGMP version globally.
Use the undo version command to restore the system default.
The default IGMP version is version 2.
Related commands: igmp version.
Examples
# Set the global IGMP version to IGMPv1.
<Sysname> system-view
[Sysname] igmp
[Sysname-igmp] version 1

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English