Command Manual – Multicast
H3C S7500E Series Ethernet Switches Chapter 4 PIM Configuration Commands
4-22
View
Any view
Parameters
interface-type interface-number: Displays the PIM neighbor information on a particular
interface.
neighbor-address: Displays the information of a particular PIM neighbor.
verbose: Displays the detailed PIM neighbor information.
Description
Use the display pim neighbor command to view the PIM neighbor information.
Examples
# View the information of all PIM neighbors.
<Sysname> display pim neighbor
Total Number of Neighbors = 2
Neighbor Interface Uptime Expires Dr-Priority
10.1.1.2 Vlan1 02:50:49 00:01:31 1
20.1.1.2 Vlan2 02:49:39 00:01:42 1
Table 4-8 Description on the fields of the display pim neighbor command
Field Description
Total Number of Neighbors Total number of PIM neighbors
Neighbor
IP address of the PIM neighbor
Interface
Interface connecting the PIM neighbor
Uptime
Length of time for which the PIM neighbor has been
up, in hours:minutes:seconds
Expires
Length of time in which the PIM neighbor will expire,
in hours:minutes:seconds
Dr-Priority
Designated router priority
# View the PIM neighbor information on VLAN-interface 1.
<Sysname> display pim neighbor interface Vlan-interface 1
Total Number of Neighbors on this interface = 3
Neighbor Interface Uptime Expires Dr-Priority
101.110.110.150 Vlan1 00:37:17 00:01:28 1
To Next Page
Loading...
Need help?
General
