Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration Commands
1-28
of 16 to 63 characters in plain text will be encrypted into a password of 88
characters in cipher text. For a password of 24 characters, if the system can
decrypt the password, the system treats it as a password in cipher text. Otherwise,
the system treats it as a password in plain text.
Related commands: display local-user.
Examples
# Set the password of user1 to 123456 and specify to display the password in plain text.
<Sysname> system-view
[Sysname] local-user user1
[Sysname-luser-user1] password simple 123456
1.1.28 self-service-url
Syntax
self-service-url { disable | enable url-string }
undo self-service-url
View
ISP domain view
Parameters
disable: Disable the self-service server localization function.
enable url-string: Enable the self-service server localization function. The url-string
argument refers to the URL of the self-service server for changing user password. The
URL is a string of 1 to 64 characters that starts with http:// and cannot contain any
question mark.
Description
Use the self-service-url enable command to enable the self-service server
localization function and specify the URL of the self-service server for changing user
password.
Use the self-service-url disable command or the undo self-service-url command to
disable the self-service server localization function.
By default, the function is disabled.
Note that:
z A self-service RADIUS server, for example, CAMS, is required for the self-service
server localization function. With the self-service function, a user can manage
and control his or her accounting information or card number. A server with
self-service software is a self-service server.
To Next Page
Loading...
Need help?
General
