Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration Commands
1-47
Parameters
slot slot-number: Specifies the slot where the interface card is inserted.
Description
Use the reset radius statistics command to clear RADIUS statistics.
Related commands: display radius scheme.
Examples
# Clear RADIUS statistics.
<Sysname> reset radius statistics
1.2.14 reset stop-accounting-buffer
Syntax
reset stop-accounting-buffer { radius-scheme radius-scheme-name | session-id
session-id | time-range start-time stop-time | user-name user-name } [ slot
slot-number ]
View
User view
Parameters
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a
string of 1 to 32 characters.
session-id session-id: Specifies a session by its ID, a string of 1 to 50 characters.
time-range start-time stop-time: Specifies a time range by its start time and end time in
the format of hh:mm:ss-mm/dd/yyyy or hh:mm:ss-yyyy/mm/dd.
user-name user-name: Specifies a user name based on which to reset the
stop-accounting buffer. The username is a case-sensitive string of 1 to 80 characters.
slot slot-number: Specifies the slot where the interface card is inserted.
Description
Use the reset stop-accounting-buffer command to clear the buffered
stop-accounting requests, which get no responses.
Related commands: stop-accounting-buffer enable, retry stop-accounting,
display stop-accounting-buffer.
Examples
# Clear the buffered stop-accounting requests for user user0001@aabbcc.net.
<Sysname> reset stop-accounting-buffer user-name user0001@aabbcc.net
To Next Page
Loading...
Need help?
General
