Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration Commands
1-76
when there are a large number of users (more than 1000, inclusive). The
following table lists the recommended ratios of the interval to the number of
users.
Table 1-8 Recommended ratios of the accounting interval to the number of users
Number of users Real-time accounting interval (minute)
1 to 99 3
100 to 499 6
500 to 999 12
1000 or more 15 or more
Examples
# Set the real-time accounting interval to 51 minutes for HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer realtime-accounting 51
1.3.20 timer response-timeout
Syntax
timer response-timeout seconds
undo timer response-timeout
View
HWTACACS scheme view
Parameters
seconds: HWTACACS server response timeout period in seconds. It ranges from 1 to
300 and defaults to 5.
Description
Use the timer response-timeout command to set the HWTACACS server response
timeout timer.
Use the undo timer command to restore the default.
As HWTACACS is based on TCP, the timeout of the server response timeout timer
and/or the TCP timeout timer will cause the device to be disconnected from the
HWTACACS server.
Related commands: display hwtacacs.
To Next Page
Loading...
Need help?
General
