H3C S7500E Series

Command Manual – DHCP
H3C S7500E Series Ethernet Switches Chapter 1 DHCP Server Configuration Commands
1-18
Parameters
ip-address&<1-8>: Gateway IP address. &<1-8> means you can specify up to eight
gateway addresses separated by spaces.
all: Specifies all gateway IP addresses to be removed.
Description
Use the gateway-list command to specify gateway address(es) in a DHCP address
pool.
Use the undo gateway-list command to remove specified gateway address(es)
specified for the DHCP client from a DHCP address pool.
By default, no gateway address is specified.
If you use the gateway-list command repeatedly, the latest configuration will overwrite
the previous one.
Examples
# Specify the gateway address 10.110.1.99 in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] gateway-list 10.110.1.99
1.1.22 nbns-list
Syntax
nbns-list ip-address&<1-8>
undo nbns-list { ip-address | all }
View
DHCP address pool view
Parameters
ip-address&<1-8>: WINS server IP address. &<1-8> means you can specify up to eight
WINS server addresses separated by spaces.
all: Specifies all WINS server addresses to be removed.
Description
Use the nbns-list command to specify WINS server address(es) in a DHCP address
pool.
Use the undo nbns-list command to remove WINS server address(es) assigned from
a DHCP address pool to the DHCP client.