H3C S7500E Series Command Manual

Command Manual – DHCP
H3C S7500E Series Ethernet Switches Chapter 1 DHCP Server Configuration Commands
1-20
Related commands: dhcp server ip-pool, nbns-list.
Examples
# Specify the NetBIOS node type as b-node in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] netbios-type b-node
1.1.24 network
Syntax
network ip-address [ mask-length | mask mask ]
undo network
View
DHCP address pool view
Parameters
ip-address: IP address range for dynamic allocation. If no mask length and mask is
specified, the natural mask will be used.
mask-length: Mask length, in the range of 1 to 30.
mask mask: Specifies the IP address network mask, in dotted decimal format.
Description
Use the network command to specify the IP address range for dynamic allocation in a
DHCP address pool.
Use the undo network command to remove the specified address range.
No IP address range is specified by default.
Note that you can specify only one network segment for each DHCP global address
pool. If you use the network command repeatedly, the latest configuration will
overwrite the previous one.
Related commands: dhcp server ip-pool, dhcp server forbidden-ip.
Examples
# Specify 192.168.8.0/24 as the address range for dynamic allocation in DHCP address
pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] network 192.168.8.0 mask 255.255.255.0

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English