To Next Page

To Previous Page

Command Manual – Login

H3C S7500E Series Ethernet Switches

Chapter 1 Commands for Logging into an

Ethernet Switch

1-25

System View: return to User View with Ctrl+Z.

[Sysname] sysname ABC

[ABC]

1.1.27 telnet

Syntax

telnet remote-system [ port-number ] [ source { ip ip-address | interface interface-type

interface-number } ]

View

User view

Parameters

remote-system: IP address or host name of the remote system. The host name is a

string of 1 to 20 characters, which can be specified using the ip host command.

port-number: TCP port number assigned to Telnet service on the remote system, in the

range 0 to 65535.

ip-address: Source IP address of the packets sent by the Telnet client.

interface-type interface-number: Type and number of the interface through which the

Telnet client sends packets.

Description

Use the telnet command to Telnet to another switch from the current switch to manage

the former remotely. You can terminate a Telnet connection by pressing <Ctrl + K>.

Related commands: display tcp status, ip host.

Examples

# Telnet to the switch with the host name of Sysname2 and IP address of 129.102.0.1

from the current switch (with the host name of Sysname1).

<Sysname1> telnet 129.102.0.1

Trying 129.102.0.1 ...

Press CTRL+K to abort

Connected to 129.102.0.1 ...

**************************************************************************

* Without the owner's prior written consent, *

* no decompiling or reverse-engineering shall be allowed. *

**************************************************************************

H3C S7500E Series Command Manual

Other manuals for H3C S7500E Series