H3C S7500E Series Command Manual

Command Manual – IPv4 Routing
H3C S7500E Series Ethernet Switches Chapter 5 BGP Configuration Commands
5-5
Examples
# In BGP view, enable the comparison of MEDs for paths from each AS when selecting
the best route.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] bestroute compare-med
5.1.5 bestroute med-confederation
Syntax
bestroute med-confederation
undo bestroute med-confederation
View
BGP view
Parameters
None
Description
Use the bestroute med-confederation command to enable the comparison of the
MED for paths from confederation peers to select the optimal route.
Use the undo bestroute med-confederation command to disable the comparison.
The comparison is not enabled by default.
The system only compares MED values for paths from peers within the confederation.
Paths from external ASs are advertised throughout the confederation without MED
comparison.
Examples
# In BGP view, enable the comparison of the MED for paths from peers within the
confederation.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] bestroute med-confederation
5.1.6 bgp
Syntax
bgp as-number
undo bgp [ as-number ]

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English