H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches Chapter 3 IPv6 OSPFv3 Configuration Commands
3-24
Table 3-18 Description on the fields of the display ospfv3 vlink command
Field Description
Virtual Link VLINK1 to router 1.1.1.1 is
up
The virtual link VLINK1 to router 1.1.1.1
is up
Transit area 0.0.0.1 via interface
Vlan-interface100
Interface VLAN-interface 100 in transit
area 0.0.0.1.
instance ID Instance ID
Local address Local IPv6 address
Remote address Remote IPv6 address
Transmit Delay Transmit delay of sending LSAs
State Interface state
Timer intervals configured, Hello: 10,
Dead: 40, Wait: 40, Retransmit: 5
Timer intervals in seconds, Hello: 10,
Dead: 40, Wait: 40, Retransmit: 5
Hello due in 00:00:02 Send hello packets in 2 seconds.
Adjacency state Adjacency state
3.1.18 filter-policy export
Syntax
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } export [ isisv6 process-id |
ospfv3 process-id | ripng process-id | bgp4+ | direct | static]
undo filter-policy export [ isisv6 process-id | ospfv3 process-id | ripng process-id |
bgp4+ | direct | static ]
View
OSPFv3 view
Parameters
acl6-number: Specifies the ACL6 number, ranging from 2000 to 3999.
ipv6-prefix ipv6-prefix-name: Specifies the name of an IPv6 prefix list, a string of up to
19 characters.
isisv6 process-id: Specifies to filter the routes of an IPv6-IS-IS process, which is in the
range of 1 to 65535.
ospfv3 process-id: Specifies to filter the routes of an OSPFv3 process, which is in the
range of 1 to 65535.
ripng process-id: Specifies to filter the routes of a RIPng process, which in the range of
1 to 65535.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English