H3C S7500E Series Command Manual

Command Manual – 802.1x - MAC Authentication
H3C S7500E Series Ethernet Switches Chapter 1 802.1x Configuration Commands
1-4
Field Description
Guest VLAN
Guest VLAN configured for the port. The
value of 0 means that no guest VLAN is
configured.
Max on-line user number
Maximum number of users supported on the
port
EAPOL Packet
Number of EAPOL packets received (Tx) or
sent (Rx)
Sent EAP Request/Identity Packets Number of EAP Request/Identity packets sent
EAP Request/Challenge Packets
Number of EAP Request/Challenge packets
sent
EAP Success Packets Number of EAP Success packets sent
Received EAPOL Start Packets Number of EAPOL Start packets received
EAPOL LogOff Packets Number of EAPOL LogOff packets received
EAP Response/Identity Packets
Number of EAP Response/Identity packets
received
EAP Response/Challenge Packets
Number of EAP Response/Challenge packets
received
Error Packets Number of erroneous packets received
Controlled User(s) amount Number of controlled users on the port
1.1.2 dot1x
Syntax
In system view:
dot1x [ interface interface-list ]
undo dot1x [ interface interface-list ]
In Ethernet interface view:
dot1x
undo dot1x
View
System view, interface view
Parameters
interface interface-list: Specifies a port list, which can contain multiple ports. The
interface-list argument is in the format of interface-list = { interface-type
interface-number [ to interface-type interface-number ] } & <1-10>, where

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English