H3C S7500E Series Command Manual

Command Manual – AAA RADIUS HWTACACS
H3C S7500E Series Ethernet Switches
Chapter 1 AAA/RADIUS/HWTACACS
Configuration Commands
1-38
Field Description
Auth reject
Number of rejected authentication
packets
EAP auth replying
Number of replying packets of EAP
authentication
Account success
Number of accounting succeeded
packets
Account failure Number of accounting failed packets
Server ctrl req Number of server control requests
RecError_MSG_sum Number of received packets in error
SndMSG_Fail_sum
Number of packets that failed to be sent
out
Timer_Err Number of timer errors
Alloc_Mem_Err Number of memory errors
State Mismatch Number of errors for mismatching status
Other_Error Number of errors of other types
No-response-acct-stop packet
Number of times that no response was
received for stop-accounting packets
Discarded No-response-acct-stop
packet for buffer overflow
Number of stop-accounting packets that
were buffered but then discarded due to
full memory
1.2.4 display stop-accounting-buffer
Syntax
display stop-accounting-buffer { radius-scheme radius-scheme-name | session-id
session-id | time-range start-time stop-time | user-name user-name } [ slot
slot-number ]
View
Any view
Parameters
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, which
is a string of 1 to 32 characters.
session-id session-id: Specifies a session by its ID. The ID is a string of 1 to 50
characters.

H3C S7500E Series Specifications

General

Brand	H3C
Model	S7500E Series
Category	Switch
Language	English