Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1001 of 1904 2022-03-04
Not Subject to NDA
3.12.2.5. AT#OOBTSET - Out of Band Tone Set
This set command sets an out of band tone.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#OOBTSET=<mode>,<setting>
Set command for out of band tone.
Parameters:
Name
Type
Default
Description
<mode>
integer
N/A
selects type of OOB tone set
Values:
1
:
duration of VoLTE DTMF tone
2
:
volume of VoLTE DTMF tone
<setting>
integer
N/A
if <mode>=1, means duration of a tone.
if <mode>=2, means volume step of tone
Values:
0÷255
:
duration of every single tone in 10ms; The
default is 10
1÷10
:
volume step of tone; The default is 1
AT#OOBTSET?
Read command reports the currently setting in the form:
#OOBTSET: <mode>,<setting>

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English