Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1292 of 1904 2022-03-04
Not Subject to NDA
3.17.31. AT#PKTSZ - Packet Size
Set the TCP/UDP/IP packet size.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#PKTSZ=[<size>]
Set command sets the default packet size used by the TCP/UDP/IP stack
for data sending. Used for online data mode only.
Parameter:
Name
Type
Default
Description
<size>
integer
300
packet size in bytes
Values:
0
:
automatically chosen by the device
1÷1500
:
packet size in bytes
AT#PKTSZ?
Read command reports the current packet size value.
After issuing command AT#PKTSZ=0, the read command reports
the value automatically chosen by the device.
AT#PKTSZ=?
Test command returns the supported values of parameter <size>.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English