Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 313 of 1904 2022-03-04
Not Subject to NDA
3.2.4.17. AT#E2ESC - Escape Sequence Guard Time
This command sets a guard time in seconds for the escape sequence in GPRS to be
considered a valid one, and return to on-line command mode.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#E2ESC=<gt>
Set command sets a guard time in seconds for the escape sequence in
GPRS to be considered a valid one (and return to on-line command mode).
Parameter:
Name
Type
Default
Description
<gt>
integer
0
sets a guard time in seconds
Values:
0
:
no guard time
1÷3
:
guard time in seconds.
If the Escape Sequence Guard Time set to a value different from
zero, it overrides the one set with S12.
AT#E2ESC?
Read command returns current value of the escape sequence guard time,
in the format:
#E2ESC: <gt>

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English